Just getting down to deck surface, want to pull sleeves and see what kind of erosion I have, 4 State Trucks and Montgomery Salvage both have the Urethane mount inserts, on that already!! Considered AGKits, will likely get the head from there if not from CAT. Was astonished as to IPD pricing, can buy Cylinder packs from CAT roughly $600/hole, includes reman rods and rod bearings, working with parts tech on if can interchange 6NZ piston packs for the ACERT BXS without disrupting the world. Cat New head in lieu of Reman and exchange for ANY core with a overhaul kit is $4k, IPD 6NZ overhaul set but has mains is $3700 no head in offerings, aftermarket head cheapest found(AgKit) $3400. If only saving a few hundred, sticking with CAT.
Did order a APTIV connector kit to get rid of the wiring 'repairs' that abound on the truck.
Unable to locate salvage the air tank support arms to move fuel tank supports back, KW here is looking to see IF still available and at what cost, may have my steel supplier make up the two pair of formed C channels.